Cookies are used on this website. By browsing the site, you agree to the data processing policy
OK
Innovative Three-Layer Panel with Composite Reinforcement
We produce high quality products in accordance with the Russian GOST 31938-2012 standard and international standard GOST 31310-2015
Reduction in panel thickness
up to
Application of composite mesh on the outer facade layer of the panel will reduce its thickness from 80 to 40 mm
25%
up to
Additional useful floor area
Due to a 2-fold reduction in the thickness of the external facade layer
30
m2*
Reduction of entire panel weight
up to
Due to a 2-fold reduction in the thickness of the external facade layer
25%
Reduction of concrete consumption
up to
Due to a 2-fold reduction in the thickness of the external facade layer
25%
Savings on insulation
Thanks to the absence of thermal bridges when using composites, it is possible to reduce the thickness of the insulation from 170mm to 130mm
up to
25%
Advantages
of panels with composite reinforcement
  • calculated for a building with a perimeter of 100 m
Composite products used in a three-layer panel
Designed to connect all layers of the panel to each other. Used to replace similar products made of steel
Designed to replace traditional galvanized or stainless steel mesh
Designed for loading and unloading operations and installation, as well as for use during the demoulding of concrete products
Properties of Composite Rebar
Not afraid of chemical attack and moisture, that affects the durability of the materials usage and the possibility of their application at any time of the year
Corrosion and chemical resistance
Tensile strength of composite rods and mesh is 3 times higher than its steel counterpart
Tensile strength
Does not conduct electricity or interfere with cell phone and internet signal propagation
Dielectric, no radio interference
Does not form thermal bridges — this improves the thermal insulation parameters of the construction object
Low thermal conductivity
Even at severe frosts composite rebar does not lose its properties. Temperature threshold of operation ranges from -70°C to +100°C
Heat resistance
Lack of welding simplifies installation — any worker with a minimum set of tools can handle the binding of rebar
Easy to install
What challenges do thermal bridges pose:
Condensate formation
Condensation leads to the appearance of mold in apartments, which harms the health of residents, and worsens the appearance of the home
Solves the thermal bridges issue
Thermal bridges are local areas of a building through which higher heat transfer occurs. Typical thermal bridges are metal joints, window and door lintels, etc.
Increased energy costs
Precious heat escapes through thermal bridges, so heating costs for the building increase by about 30%
Reduced safety
Thermal bridges lead to cracks, reduced load-bearing capacity of the structure, resulting in higher building maintenance costs
Get product samples
We are confident in the quality of our products because we comply with all legal requirements for composite building materials. You can also make sure of this by ordering our samples with delivery
STAY INFORMED
CATALOG
NAVIGATION
© 2024 PANEF JSC
The information provided on the site is not a public offer
428003, Russian Federation,
Chuvash Republic, Cheboksary, Prospekt Lenina, 7
+7 (8352) 36-49-48
info@panef.ru